|
||||||||||||||
|
H. Auslegung der anderen grundlegenden Sicherheitsanforderungen |
||||||||||||||
|
Leitlinie |
Akzeptiert |
Frage |
||||||||||||
| Leitlinie H-02 |
15.03.2016 | Final assessment (Annex I Section 3.2.2) of pressure equipment must include a test for pressure containment at a pressure at least equal, where appropriate, to the value laid down in section 7.4. This section only refers to pressure vessels. Does this mean that Annex I Section 7.4 does not apply to piping, and pressure and safety accessories? |
||||||||||||
| Leitlinie H-03 |
15.03.2016 | What safety information must be given to the user in relation to Annex I points 3.3 and 3.4? | ||||||||||||
| Leitlinie H-04 |
13.09.2018 | The third preliminary observation of Annex I of the PED requires that the manufacturer shall “… analyse the hazards and risks in order to identify those which apply to his equipment on account of pressure”. In addition, the modules of Annex III require that “The technical documentation…….shall include an adequate analysis and assessment of the risk(s).”. How shall this be carried out and documented? |
||||||||||||
| Leitlinie H-05 |
20.06.2016 | Does the strength of the foundations (concrete plates, tightened gravel, piling etc), where the pressure equipment is erected, belong to the details to be considered under PED? | ||||||||||||
| Leitlinie H-06 |
08.01.2016 | The first paragraph Annex I section 7 explicitly provides for exceptions to the general rules specified subsequently. How should the achievement of “an equivalent overall level of safety” in such a case be demonstrated? | ||||||||||||
| Leitlinie H-07 |
15.03.2016 | What conditions should be considered to determine the maximum allowable pressure PS of an equipment? | ||||||||||||
| Leitlinie H-09 |
15.03.2016 | Must an individual serial number always be provided, even if the items of pressure equipment are manufactured in batches or series? | ||||||||||||
| Leitlinie H-10 |
15.03.2016 | Does the directive require a specific format for marking the year of manufacture of pressure cookers? | ||||||||||||
| Leitlinie H-12 |
15.03.2016 | Which are the essential maximum/minimum allowable limits to be marked according to Annex I section 3.3 (a) of Pressure Equipment Directive (PED)? | ||||||||||||
| Leitlinie H-13 |
15.03.2016 | Which provisions are to be followed for the CE marking of small pressure accessories and safety accessories, the dimensions of which do not allow fulfilment of the requirements of: - annex I, section 3.3 (a) about the minimum information required, - annex VI about the minimum size of the CE marking of 5 mm? | ||||||||||||
| Leitlinie H-14 |
15.03.2016 | Is it possible to undertake statistical proof testing of series-produced safety valves? | ||||||||||||
| Leitlinie H-15 |
08.01.2016 | How should the ESRs (essential safety requirements) of Annex I be interpreted in regard of boilers for generating steam or superheated water intended for operation without continuous supervision? | ||||||||||||
| Leitlinie H-16 |
31.05.2020 | If the hydrostatic pressure test required by Annex I section 3.2.2 is replaced by a pneumatic pressure test because filling with water is harmful or impractical, what value has to be used for the pressure test? | ||||||||||||
| Leitlinie H-17 |
15.03.2016 | Is it possible to provide the marking and labelling required by Annex I section 3.3 on a sticker? | ||||||||||||
| Leitlinie H-18 |
15.03.2016 | What shall be the information about pressure and temperature to be marked on bottles for breathing apparatus according to PED? | ||||||||||||
| Leitlinie H-19 |
15.03.2016 | What is the marking information to be put on the constituent parts of pressure equipment intended for domestic use? | ||||||||||||
| Leitlinie H-20 |
13.09.2018 | How do the newly introduced requirements to "analyse the hazards and risks" and make an “assessment of the risk(s)” under the PED 2014/68/EU relate to the requirement for a hazard analysis under the PED 97/23/EC? | ||||||||||||
