www.druckgeraete-online.de

Leitlinien zur Druckgeräterichtlinie 2014/68/EU

A. Anwendungsbereich und Ausschlüsse

B. Einstufung und Kategorien

C. Baugruppen

D. Konformiätsbewertungsverfahren

E. Auslegung der grundlegenden Sicherheitsanforderungen zum Entwurf

F. Auslegung der grundlegenden Sicherheitsanforderungen zur Herstellung

G. Auslegung der grundlegenden Sicherheitsanforderungen zu Werkstoffen

H. Auslegung der anderen grundlegenden Sicherheitsanforderungen

I. Verschiedenes
J. Querschnittsfragen
Status of Leitlinien:
The PED Guidelines are not a legally binding interpretation of the Directive. The legally binding text remains that of the Directive. However, the PED Guidelines represent a reference for ensuring consistent application of the Directive. They represent, unless indicated differently in the respective guideline text, the unanimous opinion of the Member States.

E. Auslegung der grundlegenden Sicherheitsanforderungen zum Entwurf

Leitlinie

Akzeptiert
durch WGP

Frage
Leitlinie
E-01		 15.03.2016 How should the condition related to the experimental design method without calculation in Annex I, Section 2.2.2 be interpreted stipulating that: Experimental design may be carried out without any calculation in accordance with Section 2.2.4 if the product of the maximum permissible pressure PS and the volume V is less than 6000 bar.L or the product PS.DN is less than 3000 bar ?
Leitlinie
E-02		 15.03.2016 In respect of pressure limiting devices, does the PED require that the permitted short duration pressure surge of 1,1 PS be maintained when the equipment is exposed to external fire conditions ?
Leitlinie
E-03		 15.03.2016 Is leakage of pressure equipment covered by PED?
Leitlinie
E-04		 20.06.2016 Shall fire extinguishers be equipped with protective devices against over-pressure ?
Leitlinie
E-05		 15.03.2016 Is it possible that the sample to be tested for the experimental design method be produced without its thicknesses reduced by the corrosion allowance?
Leitlinie
E-06		 15.03.2016 Does the essential safety requirement Annex I Section 2.10, which deals with protective devices, give the choice of the use of a safety accessory or of the use of a monitoring device
Leitlinie
E-07		 15.03.2016 Are the limits in Annex I Section 2.2.2 applicable to components of pressure equipment (like manhole covers, special flanges, etc)?
Leitlinie
E-08		 08.01.2016 In the 3rd indent of the essential safety requirement Annex I Section 2.11.1, there is the sentence “These principles include, in particular, fail-safe modes, redundancy, diversity and self-diagnosis.”, therefore do all safety accessories require to be for example “self-diagnosis”?
Leitlinie
E-09		 15.03.2016 Is there a value defined for the acceptable limit of the short duration referred to in Annex I Section 2.11.2?
Leitlinie
E-10		 13.09.2018 The last indent of section 2.2.1 of Annex I states that the decomposition of unstable fluids shall be taken into account for the loadings to be considered for the design of pressure equipment.
Is this aiming at the explosive decomposition of unstable fluids?


Oben