Material Group 35
(ALUMINIUM-BRONZE ) EN ISO 15608 Material Group 35: Copper-aluminium alloys ALUMINIUM-BRONZES The nickel aluminium bronze alloys are fairly complex materials and, during manufacture, require good control of the metal structure by attention to composition and heat treatment. Features of Aluminium-Bronze Nickel aluminium bronzes are available in both cast and wrought product forms and have a […]
Material Group 36
EN ISO 15608 Material Group 36: Copper-nickel-zinc alloys NICKEL SILVER The good strength and spring properties, their colour, their low conductivity for heat and electricity as well as their easy galvanisability for use of electrical engineering and electronics. Typical materials in group 36 Name Number Standard Product UNS CuNi7Zn39Pb3Mn2 CW400J EN 12164EN 12165EN 12420 RodWrought […]
Material Group 37
ISO 15608 Material Group 37:Copper alloys, low alloyed (other elements ≤ 5 %) not covered by groups 31 to 36 Typical materials in group 37 Name Number Standard Product UNS CuBe1,7––– CW100CC17000C17000C17000 –ASTM B-194ASTM B-196ASTM B-570 –RodRodForgings – CuBe2CuBe2CuBe2CuBe2CuBe2CuBe2––– CW101CCW101CCW101CCW101CCW101CCW101CC17200C17200C17200 EN 1652EN 12163EN 12165EN 12167EN 12165EN 12420ASTM B-194ASTM B-196ASTM B-643 PlateRodRodRodForgingsForgingsRodRodTube – CuBe2Pb– CW102CC17300 EN […]
Material Group 38
EN ISO 15608 Material Group 38:Other Copper alloy (5 % or more other elements) not covered by groups 31 to 36) Typical materials in group 38 Name Number Standard Product UNS CuMn11Al8Fe3Ni3-C CC212E-GS EN 1982ASTM B-148 Sand casting C95700 CuSi4Zn4MnP-C CC245E CuSi4Zn9MnP-C CC246E Table: Typical materials
Material Group 41
EN ISO 15608 Material Group 41 such as Nickel 200: Pure nickel Unalloyed nickel with a nickel concentration of at least 99.2%. Alloy 201 is the low carbon version of Alloy 200. They are characterised by: Applications for Pure Nickel Nickel 200 is used in the chemical industry for its corrosion resistance – particularly to […]
Material Group 42
EN ISO 15608 Material Group 42 such as Monel 400 alloy: Nickel-copper alloys (Ni-Cu) with Ni ≥ 45 % and Cu ≥ 10 % Alloy 400 is a single-phase, solid solution, nickel-copper alloy. Corrosion resistance of Monel 400 Alloy 400 has excellent resistance to neutral and alkaline salts and has long been the standard material […]
Material Group 43
EN ISO 15608 Material Group 43 such as Hastelloy C-276: Nickel-chromium alloys (Ni-Cr-Fe-Mo) with Ni ≥ 40 % Nickel-chromium alloys The corrosion-resistant nickel-chromium alloys such as Inconel 625 are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and […]
Material Group 44
ISO 15608 Material Group 44: Nickel-molybdenum alloys (Ni-Mo) with Ni ≥ 45 % and Mo ≤ 32 % The corrosion-resistant nickel-based alloys find extensive use in the chemical processing, pharmaceutical, oil & gas, petrochemical and pollution control industries in which highly corrosive environments are very common. High molybdenum alloying Molybdenum is a very important alloying […]
Material Group 45
EN ISO 15608 Material Group 45 such as alloy 825:Nickel-iron-chromium alloys (Ni-Fe-Cr) with Ni ≥ 31 % Nickel-Iron-Chromium alloys composition such as alloy 825 The high nickel content is sufficient for resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those […]
Material Group 46
EN ISO 15608 Material Group 46 such as alloy 617: Nickel-chromium-cobalt alloys (Ni-Cr-Co) with Ni ≥ 45 % and Co ≥ 10 % Features of Nickel-chromium-cobalt alloys such as Alloy 617 These alloys are solid-solution-strengthened nickel-cobalt-chromium-silicon alloys with outstanding resistance to various forms of high-temperature corrosion attack. They have an excellent resistance to sulfidation and […]